Delo Gear CGA SAE 80W-90
High performance extended drain gear oil
Delo Gear CGA SAE 80W-90 is a high performance extended drain gear oil, designed for use in heavy-duty automotive vehicle driven axles and differentials.
- Delo Gear CGA SAE 80W-90 is designed for extended drain in heavy duty final drives (driven axles and differentials) in commercial vehicles, and offers service considerably beyond what is normally possible with mineral-based formulations – as much as 3 times longer than standard mineral oils. (The precise service interval varies according to application and service severity – refer to the manufacturers’ literature for further details)
- Delo Gear CGA SAE 80W-90 promotes robust performance in high load and high operating temperature conditions. The clean-gear additive system used in the formulation helps prevent sludge and deposit formation.
- Delo Gear CGA SAE 80W-90 has numerous OEM approvals, including MB 235.20 and MAN 342 Type M3 – two particularly demanding norms that few products can meet
- The friction characteristics of Delo Gear CGA SAE 80W-90 make it generally unsuitable for use in synchronised manual transmissions and transaxles, except in applications where this type of fluid is specifically recommended (for example, MAN 341 Type GA1)
- Designed for extended drain of up to three times longer than standard mineral oils in heavy-duty final drives and differentials
- Formulated for oxidation stability, oil thickening resistance, and helps keep gear cases, bearings and seals free from harmful deposits
- Offers good low-temperature fluidity allowing fast circulation and wear protection during cold start-up
- Extreme pressure (EP) additives promote reliable protection against component scuffing and wear
- Mild-EP non-corrosive additive helps protect sensitive copper alloy components
MAN |
341 Type GA1 [5] 342 Type M3 [5] |
Mercedes-Benz |
MB-Approval 235.20 |
SAE |
J2360 [6] |
Volvo |
97321 [3] |
ZF |
TE-ML 05A [4] TE-ML 12L [4] TE-ML 12M [4] TE-ML 16B [4] TE-ML 17B [4] TE-ML 19B [4] TE-ML 21A [4] |
[3] Volvo approval number: 97321-018.
[4] ZF approval number: ZF003513.
[5] MAN approval number: TUC 0684/16.
[6] SAE approval number: PRI GL 0916.
API |
GL-5 MT-1 |
Bosch |
TE-ML 08 [1, 2] |
ZF |
TE-ML 07A [1] |
[2] List formerly administered by ZF.
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices