Metal Protective Oil L
High performance rust preventive oil
Metal Protective Oil L is a high performance mineral based preventive oil in combination with a range of additives, including rust and corrosion inhibitors, designed to provide a thin, tight, protective film over steel components in storage or transit.
- Metal Protective Oil L can be applied directly with a brush, by spraying or by immersion. If a very thin oil film is required, the oil may be heated to 50°C
- Metal Protective Oil L does not contain solvents, but it can be diluted by up to 10 % to make it more fluid. Heating is not required. When diluted, it exhibits penetrating effects and can be used as a penetrating oil
- Note: Metal Protective Oil L should never be applied to dirty and/or wet surfaces. Only apply the coating to clean surfaces and use a water repellent product to remove water or emulsion from the surface
- Provides robust protection of steel components in storage or transit
- Prevents coloured ring formation in long-term storage of rolled or stacked steel
- Resistant to red or white rust
- Long term oxidation protection
- Non-stick, non-greasy surface prevents sticking between steel sheets
- Non-stick surface prevents dust and contamination sticking to steel surfaces
- Will not change the natural appearance of protected steel surfaces
- Easily removed with solvents or alkaline cleaners
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices