Rando HD
Zinc based industrial and mobile hydraulic oils
Rando HD are a range of zinc based hydraulic oils for use in industrial and mobile service. The series is formulated with Group II base oils, in combination with rust and oxidation inhibitors, anti-foam and highly stable anti-wear additives, contributing to good pump and piston protection.
- Rando HD is recommended for use in many high-performance hydraulic applications in industrial and mobile service with moderate ambient temperatures, including high pressure vane and gear pumps and axial piston pumps.
- Rando HD 100, 150, 220 and 320 are recommended for use in hydraulic equipment reduction gears where EP properties are not required, as well as plain and antifriction bearings and circulating oil systems.
- Rando HD 100, 150, 220 and 320 are recommended for applications where AGMA rust and oxidation inhibited oils are required.
- Rando HD 10 and 22 can be used as spindle lubricants where zinc-free oils are not required. Rando HD 32, 46 and 68 are recommended for typical hydraulic oil applications where pressures may exceed 5000 psi, and for use in lightly loaded reciprocating compressors.
- Anti-wear additive package helps promote reliable system protection, and anti-oxidation formulation helps to optimise fluid and filter service life.
- Formulated to help prevent abrasive rust particles, deposits, varnish and sludge, keeping filters clean and serviceable.
- Designed with good anti-foam and filterability in the presence of water contamination, promoting smooth, reliable operation and efficiency.
|
10 |
22 |
32 |
46 |
68 |
100 |
150 |
Arburg Injection Molding |
A |
||||||
Bosch Rexroth RDE 90245 |
A |
A |
A |
||||
Eaton (Vickers) E-FDGN-TB002-E |
A |
A |
A |
||||
Eaton (Vickers) 35VQ25A (Pump Test) I-286-S (Stationary) M-2950-S (Mobile) |
M |
M |
M |
||||
Fives Cincinnatia (formerly MAG Cincinnati, Cincinnati Machine, Cincinnati Milacron) |
M p-68 |
M p-70 |
M p-69 |
||||
General Motors LS2 LH |
M |
M |
M |
||||
GROB Lubricants Chart |
A |
A |
A |
A |
A |
||
Husky Injection Molding |
A |
||||||
Joy HO-S |
M |
||||||
NSF H2b |
A |
A |
A |
A |
A |
||
Parker Hannifin (Denison) HF-0, HF-1, HF-2 |
A |
A |
A |
||||
Rexnord Falk Class A, F, J, Planetgear, Class D, G, Y, Link Belt Model R |
A |
A |
|||||
ZF TE-ML 04K |
A |
A |
|||||
ANSI/AGMA 9005-E02, 9005-F16 R&O |
M |
M |
M |
M |
M |
||
ASTM D6158 HM |
M |
M |
M |
M |
M |
M |
M |
DIN 51524-2 HLP |
M |
M |
M |
M |
M |
||
ISO 11158 L-HM |
M |
M |
M |
M |
M |
M |
M |
JCMAS HK VG 32, 46 |
M |
M |
|||||
SAE MS1004-HM |
M |
M |
M |
M |
M |
||
US Steel (AIST) 126, 127 |
M |
M |
M |
a Obsolete specification
b Rando HD ISO grades 32, 46, 68, 100, 150, 220, 320 are registered by NSF and are acceptable as lubricants where there is no possibility of food contact (H2) in and around food processing areas. The NSF Non-food Compounds Registration Program is a continuation of the USDA product approval and listing program, which is based on meeting regulatory requirements of appropriate use, ingredient review and labelling verification.
A: Approved for
M: Performance: Meets or exceeds requirements
Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices